Advertisement
Maintenance
Weekly Maintenance:
1. Turn off humidifier and unplug from wall outlet.
2. Remove top cover.
3. Remove synthetic PermaWick®. Grab handle and lift water tank from the base.
Drain any water into a sink or tub. Shake water tank gently to remove any
remaining water.
4. Fill the water tank with a mixture of 1.3 liters of water and eight (8) ounces of
white vinegar. Leave the mixture in the water tank for 20 minutes, giving the water
tank a shake every few minutes. After 20 minutes, give the water tank a
final shake and discard the mixture.
5. Rinse the water tank several times with clean water. Leave the tank cap off to
allow the water tank to dry completely.
6. Wipe the surfaces of the humidifier base with a soft damp cloth.
7. Once all the parts are clean and dry, reassemble the humidifier, refill the water
tank, and resume use.
Note: Daily and weekly maintenance is necessary to prevent the growth of
bacteria, mold, and fungi.
End of Season Maintenance:
1. Follow the instructions for weekly maintenance before storing the unit.
2. Ensure all parts are completely dry before storing the unit.
3. Store the unit in a cool, dry place.
4. Never store the unit with water in the tank.
Hunter Pure Air is not liable for any damages of any kind resulting from
misuse or improper maintenance. Warranty is only valid when proper
maintenance, as stated in this user manual, has been followed, as warranties
apply explicitly to manufacturer's defects only.
6
Advertisement
