Table of Contents
Advertisement
Ambilight
Ambilight
TV
Ambilight
Brightness
Mode
(Colour)
(Palette)
(Saturation)
i
Press the
key to get
information about the selected
menu item.
Colour modes:
•
Personal
: Select any Colour or hue to match to
your personal taste, e.g. your interior, the
program content (sports, movie, etc.), the mood
you are in, etc.
•
:The Colour is matched to that of
Warm white
most normal lightbulbs. Select this setting if you
want the Ambilight to fit best with normal living
room lighting.
•
:The Colour is matched to that of
Cool white
normal daylight (6500K). Select this setting if you
prefer more cool lighting.
Note: the 6500 K is the SMPTE recommended setting
for ambient backlighting of displays.
•
:The blue Colour is preferred by most
Blue
consumers to create a cool, modern and /or
mystical atmosphere. Select this setting according
to your personal taste or mood.
12
Ambilight is an innovative lighting concept using light with fully adjustable
colours at the back of the TV to enhance the viewing experience. Analysis of
the picture content adapts the colours continuously, or the lights can be set to
any fixed colour and many shades of white. Ambilight creates the ideal viewing
environment for your TV resulting in improved relaxed viewing, improved
perceived picture detail, contrast and colour.
In standby mode the lights can be set/operated to any colour and create a
unique ambiance in the room.
&
Select
in the TV menu.
Ambilight
é
Press the cursor down to enter the Ambilight menu.
"
Select Ambilight and press the cursor right to select
•
: will switch off the ambient lights and downlight all other menu items.
Off
•
On
: the ambient lights will be on. Refine the light settings in the menus
below.
'
Select
Brightness
to adjust the light output of the ambient lights.
(
Select
and press the cursor right to select
Mode
Relaxed
,
Movie
or
Action
•
: this will show constant light according to the settings in the
Colour
Ambilight colour menu. See below.
• The options
Ambience
match brightness and colour to the screen content.
The mode selection made will effect the speed and/or saturation and/or
intensity which determines the viewing impression.
E.g. in
mode, the rate of brightness and colour change is
Relaxed
smoothly and soft which gives you a more immersive yet relaxed viewing.
Ambience
is the rate of brightness and colour change as predefined in
the factory.
will influence the perception of a movie whereas
Movie
influence the dynamic impression.
Notes:
- The rate of change is limited, as not to cause uncomfortable sensations.
- According to the selection made, some Ambilight menu items will be downlighted
and can not be selected.
§
In case
has been selected in the Mode menu:
Colour
• Select
in the Ambilight menu and press the cursor right.
Colour
• Select
Personal
,
Warm white
• Select
to select the general colour of the light.
Palette
• Select
to adjust the colourfullness of the light.
Saturation
Notes:
- Adjusting the Palette and/or Saturation settings will set the colour mode to
Personal.
- The selected Colour mode will be the one used when turning on the ambient
lights from standby.
Ambilight in Standby mode
When the TV is switched off, the ambient lights will also be switched off.
When the TV is in standby mode, ambilight can be used to provide a unique
ambience for the room. Press the ambilight on/off key on the remote
control to switch between Ambilight Off or On.
Infrared interference on external devices
To avoid bad remote control reception, place your external devices out of
sight of the ambient lights of your TV set.
Note: Ambilight does not function well when the room temperature is less than
15°C.
Off
Colour
.
,
Relaxed
,
Movie
and
Action
,
Cool white
or
Blue
or
.
On
,
,
Ambience
will dynamically
mode will
Action
.
Advertisement
Table of Contents
