Connect A Dvd Player, A Satellite Receiver Or Cable Box - Philips 32PF9531 - 3 Manual

Connect a DVD player, a satellite receiver or Cable box

EN
Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
H
V
via RGB-HV
AV1/AV2 :
S-VIDEO
1 AV2
AV1/AV3 :
YPbPr
1
42
Pr
L
/R
AUDIO
Pb
R
/B
VIDEO
Y
/G
DIGITAL
AV1 AUDIO
VGA (PC)
IN
AV3
S-VIDEO
VIDEO
Pr
AV1/AV2 :
L + R
L Pb
S-VIDEO AUDIO
R Y
2
DVD / STB
AV1
Pr
L
H
/R
AUDIO
Pb
R
V /B
VIDEO
Y
/G
DIGITAL
DIGITAL
AV1
AUDIO
VGA (PC)
AUDIO
IN
via RGB-HV
AV3
IN
S-VIDEO
VIDEO
Pr
Pb
L
S-VIDEO AUDIO
Y
R
AV2
AV3
DVD / STB
With an S-Video connector
1. Connect an S-Video cable to the
input 1.
S-VIDEO
Note: when using the S-VIDEO connector
do not connect any device to the AV2
VIDEO or AV1 VIDEO input that you are
using.
2. Connect the audio cables to the device's audio
and jacks and to the
L R
jacks 2 on the TV accordingly to
or AV2
where you connected the S-Video cable.
With Component Video Connectors
- with digital audio :
1. Connect the three separate component video
cables 1 to the YPbPr jacks on the DVD
player and to the Y, Pb and Pr jacks of
or AV3 on the TV.
2. Connect the audio cable 2 to the digital out
of the equipment and to the
AUDIO IN connector of the TV.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 29, and link it to AV1
Digital audio in in the same Connections
menu and link it to
AV1
AV1 or AV2
and
L R AUDIO AV1
AV1
DIGITAL
or AV3 . Also select
or .
AV3