Pioneer VSX-4000 Service Manual page 26

Ws-> Gi-je/ele)i-1.¢
1. Remove two screws 1 and remove the LCD board in
Removal of lamp box (1)
the direction of arrow.
1.
Remove four screws @ and two screws @.
2. Unfasten three claws and remove the lamp box.
2. Remove bonnet in the direction of arrow A . 3. Extract four lamps.
Sheet
Urethane foam A
Front stay
Lamp box
Rubber B
Removal of lamp box (2) JAE
1. Remove two screws @.
assembly in the direction of arrow B .
3. Unfasten three claws (b) and remove the Remote
control assembly.
Panel stay
Wrapping
Lamp box
Lamp box
Remote control assembly
Panel stay
2
7
rT Lu 7 A [A
aes Lead wrapping
Lefer
Chassis
Large rivet
LCD board Urethane foam A
Urethane foamA
Claw(a) Claw(a)
10