Pioneer VSX-4000 Service Manual page 23

2. SPECIFICATIONS
Amplifier section
[POWER IN] STEREO MODE
Continuous average power output is
100 watts* per channel, min., at 8 ohms
from 20 Hertz to 20,000 Hertz with no
more than 0.005% total harmonic
distortion. **
[POWER IN] SURROUND MODE
Continuous power output (both channels driven)
Front channel:
20 Hz — 20 kHz, T.H.D. 0.005%, 8 @.......... 7OW + 70W
Surround channel:
20 Hz — 15 kHz, T.H.D. 0.3%, 82 ............ 15W + 15W
Continuous output power: 1 kHz, 0.3%, 8 Q.... 18W + 18W
Input (sensitivity/impedance)
PHONO. eocieetive ciate ees cstvesseva teak er eedtendcea ss 2.5 mV/50 k&
CD, TAPE, VCR 1, VCR 2, VDP. ...........000+ 150 mV/30 k2
POWER INPUT: FRONT .........ccsscesseeeseeeeneeee 1 V/50 kQQ
POWER INPUT: SURROUND .............0005 150 mV/50 kQ
Damping factor
VKHZ, BD: csi decwees slasernetic cess Se eateadicdeis vets aeedese 55
Phono overload level (T.H.D. 0.03% 1,000 Hz)
PHONO | oiscnccecatacatekeseede cdeseveed A ecccnedeecadesiwedes 140 mV
Cartridge load capacity/load resistance
PHONO ........ eaiduusedeccd. ccd susbaieesencweetesddes 220 pF/50 k2
Frequency Response
PHONO, 20 Hz — 20 KHZ ..........cceecseseeceeeeeeneees +0.3dB
CD, TAPE, VCR 1, VCR 2, VDP, 5 Hz — 100 kHz..... +2dB
VDP IN ~ SURROUND OUT (at DOLBY SURROUND)
30 zi 7 KAZ ai cecehs erie ci ietraeheta estes +$dB
Output (level/impedance)
VCR REC, TAPE REC ...........ccccsecenseeeees 150 mV/4.7 kQ
PREAMP OUT: FRONT .........csecesseeseeeseneceees 1/470 Q
PREAMP OUT: SURROUND ...............066 150 mV/470 2
PAR ote teods ois toe iateesbune eden ee denten seede ccaetess 1V/4.7kQ
Tone control
BASS: 100)H2. ise. sicd dc tlnesieaserchtecedeacledcesctecs +8 dB
TREBLE; 10 KAZ. cecicetseccoie seoites aawedem ees eseascieoees +8dB
VCR NOISE FILTER .............-.c000ee 50 Hz, 5 kHz: —6 dB/oct
MURING ciceiel cose tis ocet eigen covets Saag seiacaesides seustntedeense dees — 0
Loudness CONTOUF ..........cceceecececeeeeeeeeeeees +6 dB (100 Hz),
+3 dB (10 kHz)
Channel separation
PHONO) wccc.c.cccsescecsecsecs cus seeaveneseeseseeaeeees 65 dB/1 kHz
CD, TAPE, VCR 1, VCR 2, VDP ..........sceeevee 65 dB/1 kHz
Signal to noise ratio (IHF, short circuited A network)
PHONO: eess.cdeGs icraediteea etd ase ce eee cetvin de sveven aus 83 dB
CD, TAPE, VCR 1, VCR 2, VDP. .......eecceseceeceeeee ees 98 dB
Signal to noise ratio [EIA, at 1 W (1 kHz)]
PHONO csccesseccacetec avanes bank sctsi cig etateatiewataieoet ees 77 dB
CD, TAPE, VCR 1, VCR 2, VDP. ou... sc ceceeseeeeeeeeee eee 79 dB
Distortion (SURROUND)
1 kHz, VDP IN ~ SURROUND OUT (at DOLBY SUR-
ROUND) -sesectec ceiciaeden sect eee located chance mea os 1%
SPEAKER 20 cc 02s cseiacecsnsdacesexcsmvacan sis OFF, A, B, A parallel B
Speaker impedance .............ceseececeeeeeeeseeeeeees 4— 162
VIDEO Section
Input (Level/Impedance)
VCR 1, VCR 2, VDP/VCR 3, ADAPTOR ........... 1 Vp-p/75 22
Output (Level/Impedance)
VCR 1, VCR 2, ADAPTOR, MONITOR ..........06 1 Vp-p/75 Q
Frequency Response
VCR 1, VCR 2, VDP/VCR 3, ADAPTOR, MONITOR ............
5 Hz — 6 MHz (+$ dB)
Signal to noise ratio ...........ccceesecsecescesseeeseeescneeeeees 55 dB
Choss talk: winsscricseecdenc aceite eid 55 dB (3.58 MHz)
Enhancer (DETAIL) ...........:.cecececeeeeseeeseeeseees 2 MHz +3 dB
A video adaptor is provided only on the VSX-5000. It is net
provided on the VSX-4000.
FM Tuner Section
Frequency range .........seecececeeeeneeseees 87.5 MHz — 108 MHz
Usable sensitivity .......... Mono; 10.8 dBf, IHF (0.95 uV/75 &)
50 dB Quieting sensitivity .............ccccecseceeseeseeceeeeeeeeerenees
Mono; 15.3 dBf, (1.6 hV/75 2)
Stereo; 37.1 dBf, (19.5 wV/75 &)
Signal to noise Ratio .............:seeeeeeee Mono; 80 dB (65 dB')
Stereo; 75 dB (85 dBf)
DIStOMiON: disessdicvdueresccedbetedecesessbes Mono; 0.08% (100 Hz)
0.08% (1 kHz)
0.2% (6 kHz)
Stereo; 0.2% (100 Hz)
0.15% (1 kHz)
0.3% (6 kHz)
Capture rations. ccscteccctetse cevcenecdetass aces dup endedasisssteaae 1d8
Alternate channel selectivity ...............:0s000 65 dB (400 kHz)
Stereo separation .........sccecscsceseececereeceeceeees 50 dB (1 kHz)
35 dB (30 Hz — 15 kHz)
Frequency reSponse ............seeece eee 30 Hz — 15 kHz (+$5dB)
Image interference ratio ...........:.ceeceeeceee seca eseneeeeeees 50 dB
IF interference ratio .........cccceceeseceeeeeeeeeseeseeseeeeneees 80 dB
AM SUPPFeSSION ratio .........cesecsecececeeeseseeenseneeeeseees 55 dB
Spurious interference ratio ...............eeeseceeceeeeeeeeeeeee 70 dB
Antenna input
Pitan teiits ese 300 2 BAL/75 2 UNBAL F-type connector
BACATV): -c2ccc5; scaveers casters 75 2 UNBAL F-type connector
AM Tuner Section
Frequency range ..........sccesecscecnececececsseesceeeeees seneieas mounted
When 10 kHz step: 530 kHz — 1,600 kHz
When 9 kHz step: 531 kHz — 1,602 ktiz
Sensitivity (IHF, Loop antenna) ..............-:.:eeeees 300 pV /rr.
SGleCtiVity: stoi tv ete nsaseus chee eves eis nohostucedst tas eceeoets 20 dB
Signal to noise ratio ............eeceeeeeeeee es 50 dB (100 dB pV/m)
Image interference ratio ..........cceecceeaeeceeeceneeenees ve. 450B
IF interference ratio ...........cccsecececececenseeeeceeeeseeeeeens 70 dB
ANteNina' wisseees cccteainest eisiwe Saiatesd hs eaatedieved Loop antenna
Miscellaneous
Power requirements
U.S., Canadian models .............csceseeeees AC 120 V, 60 Hz
Other destination models ............ AC 110/120/220/240 V
(switchable), 50/60 Hz
Power consumption
U.S., Canadian models ..............cceceeeeee 380 W, 470 VA
Other destination Models ...............cceecseeeeeeeeeeees 380 W
In stand-by CONGItION ...........ccecse scene eeeseneceeeareeeeene 5W
AC Outlets
SWITCHED X2 .......ccecccseeeceeeeeeenes TOTAL 300 W MAX
UNSWITCHED X 1... ccc cecceccecececeeeeeeeeeene 200 W MAX
Dimensions ..............ececeeees 420 (W) x 124 (H) x 381 (D) mm
16-9/16 (W) x 4-3/4 (H) x 14-15/16 (D) in
Weight (without package) ............:eceeeeeeee 10 kg (22 Ib 1 oz)
WA-> Ci-jeleleli=),¢)
Furnished Parts
AM Loop Antenna .......ccccseceeeeceee eee een een e een eeseeeneeeeeen ees 1
Dry Cell battery ..........cccscseceeeeeee eee eeeeeneeenueeaeceeeeeaeaenans 2
3. REMOTE CONTROL UNIT OPERATION
In addition to the present unit, the remote control unit can also
be used to operate other Pioneer components (TV, VCR, VDP
or CD) bearing the §§ mark.
SLEEP key
Press to enable the sleep timer function. Each time you press
the key, the timer function becomes 60 minutes, 30 minutes,
or OFF, in that sequence.
When the SLEEP display is fully lit, this means 60 minutes,
when it is half lit, this means 30 minutes, and when it is out,
this means OFF.
RECEIVER power stand-by/on key
Audio/Video Function keys
SURROUND MODE key
|
FM/AM selecor keys
TV keys
... Sets the TV set function to VDP.
TV ... Sets the TV set function to TV.
— ... Reduces the TV set's sound volume.
+ ... Increases the TV set's sound volume.
PHONO keys
® (PLAY)... To begin record playback.
@ (STOP) .... To stop record playback.
SURROUND MODE key
[When controlling the VSX-5000]
Selects the surround mode. Each time the key is pressed, the
function is switched in the following order:
STUDIO --STADIUM= DOLBY SURROUND — OFF
[When controlling the VSX-4000]
Selects the SURROUND mode. Each time the key is
pressed, the function is switched in the following order:
SIMULATED __ STEREO. SIMULATED STEREO
SIEBEGS "2 WIDE STEREO WIDE
VCR power key
Use to turn power ON/OFF to a VCR.
A/V selector switch
TV power key
Use to turn power ON/OFF to a TV.
VIDEO SELECTOR key
SURROUND VOLUME key
(functions only with the VSX-5000)
BALANCE key
MASTER VOLUME key
TUNER CH key
(When the A/V selector is '"A'')
The station which is memorized
in the STATION CALL switch
will be received.
+:By pressing this switch, the
channel number of the STA-
TION CALL switch will in-
creases.
—: By pressing this switch, the
channel number of the STA-
TION CALL switch will
decrease.
NOTE:
Unless the FM or AM function is
selected using the BAND selec-
tor keys, you cannot receive a
broadcast.
TV CH key
(When the A/V selector is ""V'')
+: Selects channels in ascen-
ding order.
~-: Selects channels in descen-
ding order.