Advertisement
1) Loosen 8 screw " D " at the back panel as shown in figure
Service position A
7.
2) Loosen 6 screw " F "on the top of main board as shown in
figure 8.
8
tote Sahat,
.
Figure.7
Note:
In some service positions the components or copper patterns of one board may risk touching its neighbouring pc
boards or metallic parts. To prevent such short-circuit use a piece of hard paper or other insulating material between them.
Service position B
m e
Figure 8
R.G.B Jack use for MX3660D/21H
MX3660D/30
MX3660D/37
Figure 9
Advertisement
