Advertisement
WARNNING
Please make sure if power supply be turned off
before assembly, and avoid from accident
caused during procedure of assembly.
Please take apart the drill and remove worked
item before assembly.
Please adjust suitable length of cord and watch
out the wiring, never pressure power cord by
clog then ambroin broken case short or spark.
Please don't disassemble
for fixing or
refitment and free from accident or break
down caused by unhealth assembly.
Please make sure input voltage for power feed
as A.C.110V and avoid wrong power then burn
down circuit board, except A.C. 11OV,please
adopt the transformer.
A. C.
II
av
6J
Please don't set the power feed in excessive
wettish working zone and don't wash down
the power feed by water or water shipped
then cause short or spark.
2
Advertisement
