Advertisement
Other speaker setup options
• Attaching to a wall
0
Drive a screw (not included) into a wall.
Fit the speaker
securely onto the screw(s)
with the hole{s).
oThe wall or pillar on which the speakers are to be attached should
be capable of supporting f0 kg (22 lb.) per screw, Consult a
qualified building contractor when attaching the speakers to a
wa& Improper attachment
may result in damage to the wall and
speakers.
Wall or pillar
30-35
mm ( f s/W'- lS/_ ")
e.g.
Front speaker
Center speaker
So that the speaker fits up against the wall
squarely, be sure to press the speaker cable
down into the groove.
u
ln this position, the speaker wilt
position,
tikety faii if moved to the teff or right.
__..-----
Move the speaker so the screw is in this
U
•
Fitting speaker
stands
(not included)
Ensure the stands meet these conditions before purchasing them.
Observe the diameter and length of the screws and the distance between screws as shown in the diagram.
eThe stands must be able to support over f0 k£_(22 lb.).
eThe stands must be stable even if the speakers are in a high position.
e.g.
Front speaker
5 mm (W0_'),
4tch 0.8 mm (V_")
Speaker stand
(not included)
Attach the stands to
Plate thickness plus 7 to 10 mm
these metal screw
(plus 9/3_"to _/_")
holes.
Advertisement
