HP 54601 Programmer's Manual page 94

Programmer's Quick Reference
Commands and Queries
Command
:TRACe:MODE
<N> {ON | OFF}
:TRACe:SAVE
<N>
*TRG
:TRIGger:COUPling
{AC | DC}
:TRIGger:FIELd
{ALTernate | ONE | TWO |
VERTical}
:TRIGger:HOLDoff
<holdoff_time>
:TRIGger:LEVel
<level_argument>
:TRIGger:LINE
<line_number>
:TRIGger:MODE
{AUTLevel | AUTO |
NORMal | SINGle | TV}
:TRIGger:NREJect
{OFF | ON}
:TRIGger:OPTMode
{LINE | FIELD1 | FIELD2 |
VERTical |
ALLLINES | ALLFLDS}
:TRIGger:POLarity
{POSitive | NEGative}
:TRIGger:REJect
{OFF | LF | HF}
n/a
:TRIGger:SLOPe
{NEGative | POSitive}
8–16
Query
:TRACe:MODE? <N>
n/a
n/a
:TRIGger:COUPling?
:TRIGger:FIELd?
:TRIGger:HOLDoff?
:TRIGger:LEVel?
:TRIGger:LINE?
:TRIGger:MODE?
:TRIGger:NREJect?
:TRIGger:OPTMode?
:TRIGger:POLarity?
:TRIGger:REJect?
:TRIGger:SETup?
:TRIGger:SLOPe?
Options and Query Returns
<N> ::= 1 to 100
<return_state> ::= {ON | OFF}
<N> ::= the trace memory number (1 to 100).
n/a
{AC | DC}
{ALTernate | ONE | TWO | VERTical}
<holdoff_time> ::= the holdoff time value in seconds in NR3 format.
<return_value> ::= the trigger level in volts in NR3 format.
<line_number> ::= integer in NR1 format.
{AUTLevel | AUTO | NORMal | SINGle | TV}
{OFF | ON}
{LINE | FIELD1 | FIELD2 | VERTical | ALLLINES | ALLFLDS}
{POS | NEG}
{OFF | LF | HF}
TRIG:MODE {AUTL | AUTO | NORM | SING | TV}; SOURCE <source>;
LEVEL <level>; HOLD <time>; SLOPE {POS | NEG}; COUP {AC | DC};
REJ {OFF | LF | HF}; NREJ {ON | OFF}; POL {POS | NEG}; TVMODE
<tvmode>;
TVHF {ON | OFF}
<level> ::= trigger level in volts in NR3 format
<time> ::= holdoff time value in seconds in NR3 format
<source> ::=
{CHAN{1 | 2} | EXT | LINE} for HP 54600/03/10/15/16
{CHAN{1 | 2 | 3 | 4} | LINE} for HP 54601/02
<tvmode>::=
{FIELD1 | FIELD2 | LINE} for HP 54600/01/03
{FIELD1 | FIELD2 | LINE | VERT} for HP 54602/10/15/16
{NEG | POS}