Advertisement
5.CONTROL
RANGE
SWITCH
To Choose the frequency of Boost-cut control range at + 6dB, + 9dB, or + 12aB.
6.LEVEL CONTROLS
Located on the front panel of your Equalizer are two Variable Frequency Spectrum.
Level Balancing Controls.
since it is possible that certain settings of the Frequency Equalization Slide Controls
will increase or decrease the total average signal level, the LEVEL CONTROLS
are
used to adjust each
channel
so that the average
output will be equal to the input
signal level. This adjusts the Equalizer for Unity Gain.
7.LINE OUTPUT JACKS
These outputs typically plug into. yout amplifier's "input" jacks.
8.LINE INPUT JACKS
9.110V 60Hz/220V 50Hz SELECTOR
In this way, the equalizer is used to flatten the often uneven
frequency response
of
stereo components
and
compensate
for peculiarities in room
acoustics
and also to
reduce noise in program source.
By moving the appropriate controls up or down a few dB, you can alter the total qual-
ity to suit your personal preference.
Advertisement
