What Do I Do Now - Audi A3 2011 Owner's Manual

llffl!l.,___ W __ h_ a _t_ d _o _ I _ d_o _ n _o_ w _ ? _____________________________________________ _
What do I do now?
Jack, tools and spare wheel
Jack and tools
The tools and jack are stored underneath the floor panel
in the luggage compartment.
- Raise the floor panel with the loop.
Fig. 182 Floor panel
hung on the bottom of
the luggage compart·
ment cover
Fig. 183 Vehicle tool
kit and jack
- Hang the Loop on the underside of the Luggage compart-
ment cover => fig. 182.
- Remove the tool kit or the jack .
The onboard tool kit includes:
• Hook for remov ing whee l covers *
• Plast ic hook to remove wheel bolt covers
• Wheel bolt wrench
• Alignment pin for changing wheels
• Screwdriver with reversible blade
• Towing eye
Before stor ing the jack , make sure it is wound back dow n as far as it
w ill go .
After use, the jack and tools must be put back in place underneath
the floor panel in the luggage compartment.
Note: some of the on-board items list ed above are provided on
certain models only or are opt ional extras.
&
WARNING
Improper use of the vehicle jack can cause serious personal inju-
ries.
• Using a bumper jack to raise the vehicle will damage the
bumper system. The jack may slip, causing injury .
• Never support your vehicle on cinder blocks, bricks or other
objects. These may not be able to support the load and could cause
injury when they fail.
• Never start or run the engine while the vehicle is supported by
the jack.
• If you must work under the vehicle, always use safety stands
specifically designed for this purpose.
• Never try and use the hexagonal socket in the handle of the
screwdriver to loosen or tighten the wheel bolts. _.,