Table of Contents
Advertisement
Normal
Dolby Pro Logic
Dolby 3 Stereo
Hall Surround
Sound
Press the green
Sound mode
This menu allows you to select the different Dolby Surround modes.
æ
Select
SOUND MODE
The
SOUND MODE
Â
Use the
keys to select the
DOLBY 3 STEREO
For each setting, the active loudspeakers are displayed on screen.
Normal
The left (L) and right (R) channels are reproduced on the left and
right loudspeakers of the TV set.
Dolby Pro Logic*
As well as the left (L) and right (R) channels, a centre channel (C)
and a rear channel comprising 2 loudspeakers (S), reproduce the
Dolby Pro Logic sound.
This mode is used when a film or programme has been recorded or
encoded in Dolby Surround sound.These films or programmes are
always indicated by the symbol
Dolby 3 Stereo
Dolby 3 Stereo sound is produced only on the left (L), right (R) and
centre (C) channels.
Hall Surround
The left (L) and right (R) channels are reproduced on the left and
right loudspeakers of the TV set and on the rear channel (S), creating
a "Hall Surround" ambient effect.
This mode is recommended for broadcasts that are not encoded in
Dolby Surround if you wish to use a rear channel.
To exit from the menu
Dolby Pro Logic and Dolby 3 Stereo modes are not recommended for mono
transmissions (only the central channel is used).
Sound level
This menu is used to balance the volume between the loudspeakers.
æ
Select
SOUND LEVEL
The
SOUND LEVE
Â
Select
(
TEST
emitted in turn from each channel: left, right, centre and rear channel.
ê
Use the
keys to adjust the level of each channel independently:
,
BALANCE
CENTRE
being changed and then automatically starts up again.
To stop the test : Press the blue
Levels may also be adjusted without using the test signal.
*
M a n u f a c t u red under license from Dolby Laboratories Licensing Corporation.
"Dolby" "Pro Logic" and the double-D symbol
Laboratories Licensing Corporation.
key to display the
SOUND
(the
keys) and press the
menu appears.
NORMAL
or
HALL SURROUND
(with Dolby Surround sound sources)
(with Stereo sources)
(with mono or Stereo sources)
: Press the blue
(
keys) and press the
L menu appears.
keys) and press the
and
.The sequence stops while the level is
REAR
key.
menu.
key.
,
,
DOLBY PRO LOGIC
sound modes.
.
key.
key.
key.A continuous sound is
a re trademarks of Dolby
11
Advertisement
Table of Contents
