Kenwood SW-700 Instruction Manual page 7

M@ If the amplifier is not equipped with a Super
Woofer Pre-Out jack
1, Connect the Black/Red cord and Black/White cord of the
supplied adaptor to the speaker terminals of the amplifier.
2. Connect the pin type jack of the adaptor to the pin type IN-
PUT jack of the Super Woofer using the supplied pin-plug
cord.
3. Connect the cords of the left and right front speakers to the
push-in type terminals of the adaptor.
Amplifier
oO a
'@ a
ft ;
Supplied adaptor
CAUTION:
When connecting the supplied adaptor to the amplifier, be sure to
always connect the "+ "' terminals to "'+'' terminals and the ""~"" |
terminals to ''— terminals. If a '* +" terminal is connected to a
"*— terminal or vice versa, the amplifier may be damaged.
SW-700
Super Woofer
Front speaker (R) Front speaker (L)
Rear surround
speaker (R)
Rear surround
speaker (L)
Supplied pin-plug
cord
Sw-700 (En) 7
m
=
9)
a
77)
=