Optional Antenna Connections - Technics SE-CH530 Service Manual

Hide thumbs Also See for SE-CH530:
Table of Contents

Advertisement

SE-CH530
@ Optional Antenna Connections
A FM outdoor antenna (not included)
75Q coaxial cable (not included)
AM loop antenna
FM
outdoor antenna (not included) EY
You may
need
an outdoor antenna
if you use this system
in a
mountainous region or inside a reinforced-concrete building, etc.
An outdoor antenna should be installed by a competent technician
only.
For areas except Continental Europe: EE]
1. Remove a piece of the outer vinyl sheath from the end.
2. Bundle the shield braid, and remove a piece of the inner vinyl
sheath covering the core wire.
3. Connect the core wire and the shield braid.
AM (MW/LW) outdoor antenna (not included)
An outdoor antenna may be required in a mountainous region, or if
this system is located inside a reinforced-concrete building, etc.
Connect the outdoor antenna without removing the AM loop an-
tenna.
Run 5 to 12 m of vinyl-covered wire horizontally along a window or
other convenient location.
For areas except Continental Europe: [2]

Advertisement

Table of Contents
loading

Table of Contents