Specifications - Yaesu FT-901DM Instruction Manual

SPECIFICATIONS
GENERAL
Frequency coverage:
160m 18-20 Mile
80m 35-40. MHz
410 70-75 MHz
20m 14.0-18,5 MHz
15m 21,0-21.5 Mz
Toma 28,0- 28.5 MHz
10m 28:5-29.0MHz
Vom 29,0- 29.5 MHz
1mb 29.5. 29.9 Mile
WWV/LIY 15.0-15.5 Milz, RX only
Power requirements:
'AC 100/{10/117/200/220/234 W, $0}60 Ile
DC. 13.5 V, negative ground
(DC option FT-901D/SDIDF)
Power consumption:
(FT-901DM/D/DE
ACIITV: TOwatts receive
(45 watts HEATER OFF)
320 watts tansinit (max)
DE ILS Vs SA receive
(TA HEATER OFF)
2A transmit (max)
(FT9018)
AC IITV: 55 watts receive
(4S wats EATER OFF)
105 watts tansmmit (max)
DC IRS V: 3K A receive
(08 A HEATER OFF)
7.5.8 transmit (mux)
Size
342 (W) x 154 (HD) x 324 (0D) mm
Weight:
Ike
TRANSMITTER
Emission:
LSB, USB (AR). CW CAT), AM (ASD), FM.
(£3) (option FT-901SD/DE). FSK (1)
PA input power:
FT-901DM/D/DE
SSB/CW. 180 watts DC
AN/ESK/FM. 0 watts DC
F901sD
SSB/CW/FSK/FM: 20.watts DC
aN. S watts DC
Carrer suppression:
Better than 40 db
wanted sideband suppression:
Better than 40.48 1000 He
Spurious radiation:
etter than 40 UR below rated output
'Transmitter frequency response
300-2700 He (~6 db)
'Third order distortion produets:
Beiter than 31 dB below rated ourput
'Transmitter frequency stability
tess thin 300 Hp after 10 exinute wasmup,
fess than 100 1b after 30 minute wartnup,
Negative feedback:
dB at 14 MHZ
Modulation:
ABE: Balanced mods
ABI: Amplitude modulation of « low power
Pa: Variable-reacta © frequeney. moguls
tion, mas. deviation #5 kH2 (F3 fea:
ture optional on FT-9O1SD/DE)
Antenna output impedance:
50-15 Ohms. unbalanced
Microphone input impedance:
500 - 600 Ohms