Important Safety Instructions; Installation; Maintenance - Technics SX-PC25 Quick Start Manual

Hide thumbs Also See for SX-PC25:
Table of Contents

Advertisement

Important Safety instructions
WARNING
When
using electric products, basic precautions
should always be followed, including the following;
«
Read
all the instructions
before
using
the
product.
Salety
e
Power
Source—The
product should be con-
nected
to a power
supply only of the type
described in the operating instructions or as
marked on the product.
e
Polarization—This product may be equipped
with a polarized
line plug (one blade
wider
than the other). This is a safety feature. If you
are unable to insert the plug into the outlet,
contact an electrician to replace your obsolete
outlet. Do not defeat the safety purpose cf the
plug.
e Periods of Non-use— The power-supply cord
of the product should be unplugged from the
outlet when left unused for a long period of
time.
Installation
e Water and Moisture— Do not use this product
near
water—for
example,
near
a bathtub,
washbowl, kitchen sink, in a wet basement, or
near a swimming pool, or the like.
« Cart/Stand—This
product
should
be used
only with a cart or stand that is recommended
by the manufacturer.
e
Ventilation—The
product should
be located
so that its location or position does not inter-
fere with its proper ventilation.
e
Heat—The
product should be located away
from
heat sources
such
as
radiators,
heat
registers, or other products that produce heat.
«
Foreign Material—Care
should be taken so
that objects do not fall and
liquids are not
spilled into the enclosure through openings.
Listening caution
This product, either alone or in combination with
an amplifier and headphones
or speakers may
be capable of producing sound levels that could
cause permanent hearing loss. Do not operate
for a long period of time at a high volume level
or at a level that is uncomfortable.
If you ex-
perience any hearing loss or ringing in the ears,
you should consult an audiologist.
Service
«
Damage
Requiring
Service—The
product
should be serviced
by qualified service per-
sonnel when:
a. The power-supply cord or the plug has
been damaged; or
b. Objects have fallen, or liquid has been
spilled onto the product; or
c. The product has been exposed to rain; or
d. The product does not appear to operate
normally or exhibits
a marked change in
performance; or
e. The product has been dropped, or the
enclosure damaged.
e Servicing—Do
not attempt
to service
the
product beyond
that described
in the user-
: maintenance instructions.
All
other
servicing
should
be
referred
to
qualified service personnel.
Maintenance
e Be sure to switch this unit off after use, and
do not switch the unit on and off in quick
succession, as this places an undue load on
the electronic components.
e
To maintain the luster of the keys and buttons,
wipe with a clean, damp cloth, and polish with
a soft, dry cloth. Polish may be used, but do
not
use
thinners
or
petro-chemical-based
polishes.
« A wax-based
polish
may
be used
on
the
cabinet, although you will find that rubbing with
a soft cloth will suffice.
|
SAVE THESE INSTRUCTIONS
|

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx-pc26

Table of Contents