Advertisement
Instructions for use
Touch Screen
Manual Control
POWER When blender is first
plugged in, the blue power symbol
is all that shows. When it is touched,
the other graphics light up (except for
and
). If the blender sits without
controls touched for 30 seconds, the
screen dims.
To "wake up" the blender, touch any of
the white words or symbols.
If the power button is pressed while the
screen is dim, the rest of the graphics
will turn off.
Note: For your safety, the pulse function
requires two button presses to activate.
Press any button to illuminate the
PULSE button, then press the PULSE
button to start the pulse function.
BL6018-1BP_29948_E_IB_C.indd 9
BL6018-1BP_29948_E_IB_C.indd 9
Note: When using the pulse function,
do not use for more than 5 seconds at a
time, allowing the blender to rest briefly
between each pulse, no more than 2
minutes total. This helps break up ice
and distribute the ingredients.
SPEED SLIDER WITH – AND +
Use your finger on the slider to select
the exact speed you want. Using –
makes the slider go all the way to the
lowest speed. Using + makes the slider
go all the way to the highest speed.
START When using the speed slider,
the
will flash. Press it to start the
blender.
STOP Press
to stop the blender.
9
6/20/23 2:25 PM
6/20/23 2:25 PM
Advertisement
