Initial Setup Install the Wind Cups if needed Follow the instructions below to attach the Wind Cups with a mini screwdriver. Remove the Glide Sensor, and Wind Cups, Align the flat edges and place the Wind from the package. Take note of the flat Cups on top of the sensor.
Insert 3-AA batteries into the Glide Sensor according to polarity. Glide Wind Sensor Press on and slide down the outer cover. TX145W Lift up and remove the battery cover. Insert batteries. Replace the battery cover and outer cover. Press and slide down Sensor Placement &...
Page 4
Basic Installation Secure the Sensor to the Mount the Mast to a flat Place the Sensor on top Mast by tightening the surface with the four of the Mast. Ensure the provided screws. screws on the side. Solar Panel is facing the sun.
Stay in Touch! Ask questions, watch setup videos, and provide feedback on our social media outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook and Instagram. We’re Here to Help If you require additional assistance, get in touch with our friendly customer support team based in La Crosse, WI.
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601 For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty Patents: www.lacrossetechnology.com/pages/patents...
Battery Replacement Battery Replacement Instructions When batteries of different brand or type are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference of voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.