Working With The Device - ulsonix USX-ST2250IT User Manual

3.3.

Working with the device

3.3.1 Adjusting the position of the ironing board
a) Height adjustment:
Loosen all 4 rack locks on the posts and adjust the rack crossbar
and ironing board to the desired height and tighten all 4 rack
locks again:
b) Tilt adjustment:
Grab both board locks and pull them from both sides at the same
time. Then, holding the locks loose, set the ironing board at one
of the possible angles. After setting the desired angle, let go of
the locks to return to the starting position:
3.3.2 Control panel