Pioneer XR-A790 Operating Instructions Manual page 62

24
<XRE3003>
En
ae
@ Recording is only possibie on Type i (Normal) tapes.
Play the tape for about five seconds to go beyond the leader
tape (a section that cannot record) at the beginning of a tape.
@Recording on tapes with the erasure prevention tabs broken
is not possible. (Refer to "HOW TO HANDLE CASSETTE
TAPES", page 14.)
You cannot change functions during recording. CD OPEN/
CLOSE and DISC CHANGE are also not possible during
recording, even if you press the buttons.
e@During recording, the SOUND MORPHING and P.BASS
functions do not operate. KARAOKE ON/OFF operation is also
not possible during recording.
| Recording radio broadcasts
1. Press the Tape function button.
2. Load a tape for recording in Tape U1, and close the deck door.
3. Press the TAPE-PLAY/DIR button, select the tape direction
in which you want to record.
po Side A (m) —~
Loses Side B (<4) «———
The recording indicator in the display shows the direction in
which recording will start. When you have selected the
direction, press the STOP button.
4. Press the TUNER/BAND button, and select FM or AM.
. Tune to a desired station with the (==) and [=] buttons.
6. Press the REC START/STOP button.
Recording starts.
Recording starts in the direction indicated by the lit arrow in
the display.
7. To stop recording, press the REC START/STOP button.
NOTE:
ff noise is recorded, refer to "Beat cut function" on page 20.
a
Tape copying
1. Press the TAPE function button, and set the function to
Tape.
2. Load Tape I with a recorded tape, and load Tape [1 with the
tape you want to record to.
@Tape copying is possible in the forward direction only.
Play the tape you are recording to for a few seconds to
move past the leader tape section.
3. Press the ASES/COPY button.
Copying starts.
4, To stop recording, press the STOP button or REC START/
STOP button.
NOTE:
Copying on this unit starts from the A side of a tape and stops
when the A side of the tape in either TAPE I or TAPE Il ends.
ar