Pioneer VSX-D906S Service Manual page 112

Remote control unit
© ©0O
@®
————\ LASS — Tea
i FUNCTION MODE CHECK
Co) |C))j Co
MULTI COMMANDER
OPERATION SYSTEMOFF | SETUP
GED ik GSD 1h (GED sil
® PIONEER
MULTI CONTROL COMMANDER
PRE-PROGRAMMED AND LEARNING
RECEIVER POWER button
MUTING button
Press to mute the volume.
[When set to RECEIVER (OPERATIONS)]
A,V,<1,> ENTER (Select/Adjust) buttons
[When set to other than RECEIVER (OP-
ERATIONS)]
i0(Pause), 0 (Stop), <«i(Rewind), >t>(Fast Forward),
> (Play) buttons
VOL (-, +) buttons
[TV, VCR Operations]
Selects the TV broadcast channel.
[CD, LD, DVD operations]
Selects the function set on the receiver and changes
the remote control operations to that function. Also,
initiates the multi operation play function when used
in conjunction with the @) MULTI OPERATION but-
ton.
[When setting RECEIVER (operations)]
STEREO: Switches the STEREO mode.
112
©
O8 8 © ©
@®
DO : Switches the Dolby Surround mode.
CH. SELECT: Use to select the channel for which level
settings are to be defined.
TEST TONE: When turned ON (while in system set
up mode), volume balance adjustment signals are
output in order from the speakers and can be ad-
justed.
ATT: Operates during ANALOG signal input. When
turned ON when the sound is unstable due to exces-
sive input levels, the input signal level drops so that
the sound becomes less distorted.
SIG. SELECT: Use to select function LD or DVD input
signals. (i.e. AC-3 RF, DIGITAL, etc.)
CH. LEVEL -, +: Use to adjust the level of the channel
selected with the CH. SELECT button.
LIST IN: Use to switch to the list input screen when
using the CD or tuner function.
SYSTEM SET UP: Used to enter system setup mode.
[TUNER Operations]
Number buttons: Use for setting the frequency value
when the station call is selected or during direct ac-
cess.
CLASS: Switches the CLASS number.
DISC: Use to enter Direct Access mode.
[VCR operations]
TV/VCR: Switches between TV/VCR.
[CD Operations]
DISC: Use to select the DISC number.
LIST button
Use to display the list screen when using the CD or
tuner function.
FUNCTION button
Switches the function.
MULTI OPERATION button
Use to set the multi operation.
POWER button
Turns ON/OFF the power of devices other than this
unit.
TV buttons
RECEIVER/PERSONAL button
Press when setting to the personal mode using multi
operations.
[When setting to other than multi operation]
Press this button when using the Number/Receiver
buttons to specify receiver settings.
MODE CHECK button
COMMANDER SET UP button
Use to control and learn operations of other manufac-
turers' equipment, and set multi operation functions.
SYSTEM OFF button
Use to turn OFF the power of all equipment connected
to the main unit.