Panel Facilities And Specifications - Pioneer VSX-D906S Service Manual

VSX-D906S, VSX-07TX, VSX-09TX
8. PANEL FACILITIES AND SPECIFICATIONS
NAMES OF PARTS
Front panel
* The size of characters shown in the figure may differ
from that on the actual product.
oo ITAL
Intelligent System Control 3 To
® PIO AUDIO/VIDEO $TEREQ RECEIVER \/SX-|
rf
MX stereo
OPTICAL '5
SPEAKERS _
DSP MODE button*NOTE
DO button
SIGNAL SELECT button
STEREO button
RESET button
Displays
LOUDNESS button*NOTE
Press this button when the volume is low to raise
the low and high frequency levels so that the
sound can be heard more easily. This button
operates in stereo mode only.
DYNAMIC RANGE CONTROL button
The volume is constantly controlied to maintain an
even level and to make it possible to hear clearly
even when the volume is set to a low level. (Works
only when operating in DOLBY DIGITAL mode.)
CLASS button
MEMORY button
MPX button
Use to switch the auto stereo/monaural mode for
receiving FM broadcasts. When the received
broadcast signal is weak, press this button to set
the monaural mode.
SYSTEM SET UP button
Function buttons
eee © QOOQLOHO
@®
108
® ©@ 8Q@®
GB8So 8 8
STANDBY indicator
POWER STANDBY/ON button
PHONES jack (Headphone terminal)
Video input terminals
Connect to a video camera, etc.
OPTICAL button
SPEAKERS A, B buttons
ON/OFF switches for the A and B speaker systems.
DIRECT button*NOTE
Use to play back sound without going through the
tone control circuits. This button operates in stereo
mode only.
BASS -, + buttons*NOTE
Use to adjust tone. This button operates in stereo
mode only.
TREBLE -, + buttons*NOTE
Use to adjust tone. This button operates in stereo
mode only.
AM, FM buttons
LIST IN button
Select/Adjust buttons
MASTER VOLUME
*NOTE
These operation buttons do not function during AC-3
input.