Pioneer EQ-6000 Service Manual page 2

'Si-jelsle7g-c fr-jelale)
1. CONNECTING THE UNITS
}-speaker system + Subwoofer (EQ-6000) * Be sure to set the Crossover Frequency Switch at any position but
"OFF.
0 terminal controlled
y ignition switch
12 V DC) ON/OFF. Fuse holder
Connecting leads
with RCA pin plugs
(sold separately)
To vehicle (metal) O27 Black (ground)
body.
Fuse holder
Subwoofer out
(Subwoofer system
uses L+R channels)
Blue (system
control terminal)
Rear out
Blue (system
control terminal)
Front speakers
Subwoofer speakers
Front out
Connecting leads
with RCA pin plugs
White
(sold separately)
Fig. 1
To terminal controled
by ignition switch
(12 V DC) ON/OFF. Fuse holder
Connecting leads
with RCA pin plugs
(sold separately)
To vehicle (metal) Om Black (ground)
body.
Power amp
Fuse holder
Rear speakers
Blue (system
control terminal)
Rear out Power amp
Blue (system
control terminal}
Front speakers
Car stereo with
RCA pin jacks
White
Do not use
Connecting leads
with RCA pin plugs
{sold separately)
White Fig. 2