Pioneer PL-Z93 Service Manual page 7

Mechanism Assembly (Sub-panel Assembly)
and Motor
. Rotate the turntable platter to disengage the me-
chanism.
). Fix the tonearm to the arm rest. (Be sure to
cover the stylus with the stylus cover.)
. Remove the turntable sheet assembly and then
the turntable platter.
. Close the dust cover, turn the turntable upside
down, and place it on a soft surface, e.g., a work
bench covered with soft cloth (for product
protection).
. Remove the five screws labeled (D, and remove
the under base.
. Remove the five screws labeled @) and one
screw labeled (@), and remove the lead con-
nected to the microswitch. This operation will
release the mechanism assembly.
. Remove the two screws labeled @) to remove
the motor assembly.
.Remove the mechanism assembly from the
Tonearm assembly
panel.
sembly.
. Remove the R clip.
. Place the turntable on one of its sides, remove