Detail of A and B in Fig. 9-8
e Other Places to be Greased (PL-Z81 only)
Fig. 9-8
9.2 PRECAUTIONS
FOR ATTACHMENT
e PU Plate Assembly Attachment
OF PARTS
AND
REASSEMBLY
The PU plate assembly is attached with screw
e Cam Assembly Attachment
by pushing the PU plate bearing section against
The cam assembly is attached by letting the lock
the arm rotating shaft fixing nut.
spring go in the direction @) as shown in Fig. 9-9.
The attachment direction is matched to the
center of the support line as shown
in Fig. 9-10.
(position the tonearm above the arm rest).
Panel mark
{aligned center)
PU plate
assembly