Sears Kenmore HEPA 220 Owner's Manual page 8

REPLACING THE CHARCOAL PRE-FILTER
(Model #83134)
Step 4
Remove the filter assembly (consisting of the HEPA filter
and pre-filter) from the power head.
Step 5
Remove the strap fastener and carefully removethe pre-filter
and discard.
Step 6
Remove any plastic protective wrapping from the new pre-
filter prior to insertion into the HEPA air cleaner. Carefully
wrap the new pre-filter around the HEPA filter and secure
into place with the strap fastener. Proceed to step #10.
CHANGING THE HEPA FILTER (Model #83139)
Step 7
Follow instructions through Step 6. Remove used HEPA filter
assembly and discard the filter.
Step 8
Remove any protective plastic wrapping and packaging from
the New HEPA filter.
Step 9
Replace the pre-filter by wrapping it around the HEPA
filter and use the strap fastener to secure the pre-filter in
place. Please be sure that the pre-filter has been properly
installed and is laying flat around the HEPA filter.
Step 10
Place the filter assembly into the power head and install
the base.
Note: The HEPA filter assembly was designed to easily fit
into the power head without any orientation: there is no
top or bottom to the HEPA filter.
Step 11
Lock the base into place by replacing and tightening the
locking mechanism securely.
Step 12
Adjust the filter change calendar(s) to properly indicate
when the next filter change is necessary.
Step 13
Turn the HEPA air cleaner upright and the HEPA air cleaner
is ready for operation.
STORAGE
If you store your Kenmore HEPA Air Cleaning System
for more than 30 days, we recommend that you: