Advertisement
"Octo Telematics Spa, via Vincenzo Lamaro 51 - 00173 Roma, declares that this Telematic device is compliant to the European law
2014/53/UE. The complete text of the declaration for UE conformity can be accessed to the following URL:
www.octotelematics.com/certifications."
The working frequencies of the device are reported in the following table:
The instructions exposed in this manual are not referred to a particular type of vehicle, but they are applicable to every kind of
vehicle.
Every information provided by Octo on eventual Brand and Model is to be considered as a suggestion.
The installation, positioning, fixing and connection of power lines, and eventual removal activities, must be performed professionally.
The professional installer must verify, under his own responsibility the best way to install the device on the relative vehicle.
The professional installation of the device in the vehicle do not void the vehicle's warranty. In case of need, it is possible to download
the warranty document in the "documents" area in the Installer's Octo web profile.
Inversely, if not correctly installed, the device could void the Device's warranty with Installer's responsibility involved.
End of life disposal warning: When the unit has come to the end of its life, dispose of it in accordance with local regulations.
Do not substitute the internal battery of the device since there is the risk of explosion if the battery is replaced by an incorrect type
of battery. The disposal of the battery into or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or in the leakage of
flammable liquid or gas. A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable
liquid or gas.
Opening the device may lead to electronic components to be exposed causing electrical shock to the user.
Do not install the device in environments outside the operating temperature range -20°C to +75 °C. Overheat may cause extreme
heat or fire. Connecting the device to an incorrect power supply may result in safety related EMC issues. Use a power supply
compatible with rated voltage 12 V and rated current 500 mA.
Do not use the device in environments in which it may interfere with safety related equipment, like hospital and aircrafts.
Do not use the device in conditions not compatible with IP51 grade. The water and dust can cause short circuit and damage of the
device. Do not use the device in an explosive atmosphere environment. The device may generate sparks that will cause explosion.
Excessive pressure may broke the device causing injuries to the user.
Title: User Manual SmartDiag2GO GD201-O
Rel: 1.1
Band
GSM900（TX：880~915；RX：925~960）
GSM1800（TX：1710~1785；RX：1805~1880）
LTE Band 1（TX：1920~1980；RX：2110~2170）
LTE Band 3（TX：1710~1785；RX：1805~1880）
LTE Band 8（TX：880~915；RX：925~960）
LTE Band 20（TX：832~862；RX：791~821）
LTE Band 28（TX：703~748；RX：758~803）
BT（2402 - 2480）
VEHICLE APPLICATION RULES
GENERAL REMARKS – SAFETY AND LIMITATIONS OF USE
CE CONFORMITY
CAUTION BATTERY
Max Power
33dBm
30dBm
CAT M1：20.7dBm
NB-IOT：21dBm
CAT M1：22.5dBm
NB-IOT：22dBm
CAT M1：20.7dBm
NB-IOT：21dBm
CAT M1：20.7dBm
NB-IOT：21dBm
CAT M1：20.7dBm
NB-IOT：21dBm
3dBm
Pag. 5 a 5
Advertisement
