Table of Contents
Advertisement
Charging and attaching the battery pack
8
You will have to charge the battery pack before you
can use it. A brand new battery pack must be
charged twice before use.
1. Slide the battery pack onto the adapter
as shown.
• Make sure the DC coupler is not connected.
2. Plug the adapter into a mains outiet.
• The CHARGE/REFRESH indicator flashes red
to show that charging is in progress.
3. Wait until the battery pack is fully
charged.
• The indicator glows steadily red when the
battery pack is fully charged.
4. If the battery pack is brand new, take it
off the adapter, then slide it on again
and charge it one more time.
5. Take the battery pack off the adapter
and attach it to the camera.
• Insert the end marked with a triangle first, then
press in the battery pack until it clicks and
locks into place.
6. Detach the battery pack after use.
• Press and hold the BATTERY EJECT button
while you pull the battery pack outwards from
the rear.
• Always turn the camera off before removing
the power source.
Charging and recording times
BP-711/BP-E77K Battery Pack
Charging time
70 minutes
Continuous recording time
50 minutes
These times vary — the safest policy is
always to have two or three times as many
battery packs as you think you will need.
Advertisement
Table of Contents
