Storage And Maintenance; Replacement Parts - Chapin 8003A Use And Care Manual

General Operating Instructions
• Be sure gate control is in the closed position before filling hopper
• Determine appropriate setting for material being used by reading the suggested setting on the
material's bag AND/OR by referencing the application chart on your spreader's control panel
(Charts provided are only guidelines. Be sure to read the instructions on the bag/box of the
material you're spreading to identify accurate setting needed)
• Remove wing nut and slide indicator to desired setting. Tighten wing nut completely.
• To begin spreading, start walking (about 3mph pace) release the control lever by pushing it
forward. It will spring forward to the slide stop.
• To stop spreading simply pull the gate control back into the closed position.

Storage and Maintenance

• When finished spreading empty hopper of any remaining material
• Thoroughly wash spreader and allow to dry before storing

Replacement Parts

Ref.# Qty
1 1
2 1
Part No.
6-9067
6-8280
© 2022 Chapin International, Inc.
Due to our ongoing product improvement process, product specifications may change without notice.
Chapin Spreader Operator's Manual - English
Description
Auger
Baffle Kit
1
2