LG FHD1308STB Owner's Manual page 37

global_main.book.book Page 37 Thursday, January 12, 2023 4:38 PM
Using the ezDispense
Use the Dispenser 1 and Dispenser 2 buttons to
set up and control the ezDispense function.
Dispenser 1 button
a
Dispenser 2 button
b
c Buttons indicator
d Liquid detergent indicator
Link indicator (Using only liquid detergent both
e
compartments)
Buttons indicator
f
g Liquid fabric softener indicator
NOTE
• Whether the detergent or softener indicator may
blink and the chime may sound, even if there is
sufficient detergent or softener left to use for
approximately 2 to 4 washing programmes;
- If the liquid detergent indicator
buttons indicator ,
c
sounds, pour the detergent into the
compartment, up to the MAX line.
- If the liquid fabric softener indicator
buttons indicator blink and the chime
f
sounds, pour the fabric softener into the
compartment, up to the MAX line.
• The default settings are configured to dispense
the detergent of Dispenser 1 and the fabric
softener of Dispenser 2.
and
d
blink and the chime
f
and
g
Changing Dispense Level for a Single
Load
1
Press the Power button.
2
Turn the knob to select the desired cycle.
3
Press the Dispenser 1 or Dispenser 2 button
to increase or decrease the dispensed amount
from the set defaults.
Buttons Indicator
*1 The default settings are configured to
dispense 42 ml of detergent and 30 ml of
softener for 4-6 kg of normally soiled
laundry.
4
Press the Start/Pause button.
NOTE
• Use the manufacturer's recommendations on
the detergent or fabric softener package when
setting the ezDispense amounts for a standard
4-6 kg load.
• Most cycles will automatically use the default
amounts you have set, indicated by the Normal
LED light on the Dispenser 1 and Dispenser 2
buttons.
OPERATION
37
*1
Dispensed Amount
More (110%)
Normal (100%)
Less (90%)
Off (0%)