LG FHD1308STB Owner's Manual page 22

global_main.book.book Page 22 Thursday, January 12, 2023 4:38 PM
OPERATION
22
Customizing Washing Programme Buttons
e
Use these buttons to adjust the water temperature or spin speed settings for the selected
programme.
• The current settings are shown in the display.
• Press the button for that option to select other settings.
ezDispense Buttons
f
• Press the Dispenser 1 or Dispenser 2 to select ezDispense function.
• LED will light up to indicate the selected detergent type and amount.
• When the detergent or softener is insufficient;
- In case of pressing the Power button : The LED will blink and the chime will sound.
- In case of running the appliance : The LED will blink .
ezDispense Nozzle Clean
• Press and hold the Spin button for 3 seconds to use the ezDispense Nozzle Clean function.
This function cleans residual detergent or softener in the hose connected to the
ezDispense(when changing the type of detergent or softener).
Display
g
• The display shows the settings, estimated remaining time, options, and status messages.
When the appliance is turned on, the default settings in the display will illuminate.
• While the load weight is sensed automatically, the display on the control panel blinks.
Time and Status Display
Programme Status Indicators
a
• When a washing programme is running, LED for the active stage will blink, and the LEDs for
the remaining stages will remain steady. Once a stage is complete, the LED will turn off. If a
cycle is paused, the active stage LED will stop blinking.
Description
Description