Kenwood TH-225A Instruction Manual page 7

(8) MONITOR switch
Pressing this key will open squelch.
(9 PTT (Push To Talk) switch
@ RELEASE button
Used to release the battery.
Depress this button, and turn the battery counterciock
@ LAMP key
key controls the lamp on the LCD display.
@ OFFSET/F key
'The OFFSET/F key is used to select the desired transmitter
offset for repeater operation. Each time the key is pressed,
'the mode cycles from + shift, to — shift, to simplex, and
back to + shift. When the offset function is ON, the sym-
bol +" or " = " is displayed.
Pressing the С and the OFFSET/F key in order
change the desired offset frequency.
@ R/TONE. F key
This key is used to reverse the transmit/receive frequencies
used to
TONE. F: TONE FREQUENCY кеу
Pressing the [EJ] and the R/TONE. F key in order is used
to change the frequency of the tone encoder.
® SAVE ke
The SAVE key is used to select the power save condition
during the receive mode.
Pressing the С) and the SAVE ke
change the battery saver on/off ratio.
SPEAKER
@ MICROPHONE
BATTERY CASE
in order is used to