Kenwood KVC-470 Instruction Manual page 8

Oo» Wh —
. Press the VCR A switch.
. Set the ANTENNA selector to VIDEO.
. Press the AUDIO INJECTION switch.
. Play the audio program source,
Video dubbing from VDP to VCR A and VCR B
1,
2.
3.
4.
or
Press the VDP/TV TUNER switch.
Set the ANTENNA selector to VIDEO.
Set the AUDIO INJECTION switch to OFF,
The dubbing starts.
Video dubbing from VCR B to VCRA
1.
2
3.
4
ol
Press the VCR B switch.
. Set the ANTENNA selector to VIDEO.
Set the AUDIO INJECTION switch to OFF.
. Follow the Instruction Manuals of the VCR A and VCR B
for dubbing.
. Start recording of VCR A and playback of VCR B.
The dubbing starts.
. Use the video controls (ENHANCER, NOISE FILTER, STA-
BILIZER, FADER, SHARPNESS and DETAIL) to make your
own personalized video tape. i
To dub from VCR B or VDP to VCR A and to insert the
desired sound source into the soundtrack of the video
tape copied on VCRA
OhWN —
8
. Press the VCR B or VDP/TV TUNER switch.
. Set the ANTENNA selector to VIDEO,
. To record the tape sound, press the TAPE switch.
. Press the AUDIO INJECTION switch.
. Operate the VCR B or VDP, VCR A and audio source'
equipment so that the picture and the sound source are
matched when dubbing is started.
. Use the video controls (ENHANCER, NOISE FILTER, STA-
BILIZER, FADER, SHARPNESS and DETAIL) to make your
own personalized video tape.
KVC-470 (U)
@ Set to VIDEO,
@ Press.
@ Set to VIDEO.
@ Press.
@ Set to VIDEO.
@ Press.
@ Press.
@ Set to OFF.
@ Press.