Advertisement
Recording
KR-V8080/KA-V70480 (En)
li"
M
1 © CU
16
A (|e Y
{k (8
Uf
(fOr
it J a e
: Keys or controis to be used in this operation
To record a music source
The indut sources are switched in the following order:
1 Select the source to be recorded.
7
ints iseteCroR
1 TUNER (frequency display}
2 PI tive
cry
—————
3o2
=.
se
e@s.
((
\
av IBEGE (LB)
So?
esomeme | o] 4
5
IEG!
6 TAPE
F (MD)
Select an input source other than TAPE
1.
2 Put the cassette deck in record-
pause mode.
3 Play the source
and start record-
ing.
Copying tape (Tape dubbing TAPE 2-+ TAPE 1)
1 Press the TAPE
2(MONITOR)
key.
(MONITOR STRAIGHT LOUONESS
lights
—
Tl
TAPE 2
-
2 Select a source other than TAPE 1.
INPUT
SELECTOR
3 Play cassette deck 2 and start re-
cording on cassette deck 1.
@ For copying a tape using a double cassette deck, read the instruc-
tion manual of the double cassette deck.
oon
ooo coon
Copying tape (Tape dubbing TAPE 1 — TAPE 2)
1 Select TAPE 1 with the INPUT SELECTOR control of the
main unit.
2 Play the cassette deck connected to the TAPE 1 jacks and
start recording
of the cassette
deck
connected
to the
TAPE @ jacks.
Regarding TAPE 2 (MONITOR)
A cassette deck or graphic equalizer can be connected to this unit's TAPE 2 (MONITOR) terminals.
If you connect a graphic equalizer, turn
the TAPE
2 (MONITOR)
key ON.
!f you connect a 3-head cassette deck, you can monitor the source sound, or the sound being recorded,
while recording.
Pressing the TAPE 2 (MONITOR} key lets you compare the recorded sound and the source sound.
Refer to the operating
manual for the component you connected for further details.
Advertisement
