Philips SmartCard PA0113C Instructions For Use Manual page 33

[|]
SECURITY - Highlight SECURITY, then press the Cursor Right
(®) or Left (<q ) buttons to select STANDARD (or HIGH). Note:
The Security control item will not be in the Menu when using the
Consumer remote, but (when "STANDARD" security level has
been selected) a consumer remote button sequence (31, 97, 53,
MUTE) can be used to access to the SETUP MENU. With "HIGH"
security level selected, access to the SETUP MENU is only allowed
with a commercial Setup Remote.
EXIT - Highlight EXIT, then press the Cursor Right (>) or Left
(<q) buttons to select YES. The onscreen menu will disappear. The
onscreen menu also disappears after 60 seconds if there has been no
use of the displays.
SET TIME 3:
SET DAY
CLOCK DISPLAY ON
A
EXIT
ESS LEVEL
EVENT 1
VENT MENU - Allows access
to another sub-menu where
event specific settings are made.
The Menu control options set up
and allow for programmed opera-
tion of TV controls for up to seven
separate and specific events. Each
of the individual events can be set
for Day(s) of the week, Turn On
time, Turn Off time and preset
channel selection.
EVENT MENU
POWER - Highlight POWER, then press the Cursor Right (p>)
EVENT 1
[EVENT ENABLED ON]
ON TIME
OFF TIME
DAYS ACTIVE
11:00 AM
1:08 PM
TV10
CHANNEL
POWER FORCED
AVAILABLE RING USER
EXIT >