Kawai A120 Owner's Manual page 4

Power Supply
Cleaning
Use only a Kawai AC adaptor or equivalent shipped with the
instrument and connect it only to a power supply with a voltage
within the limits stated on the ratings plate.
When the product and/or AC adaptor are left unattended and
unused for long period of time, unplug it from the wall outlet to
prevent damage to them due to lightning and power-line surges.
Power Cord Protection — Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords
at plugs, receptacles, and the point where they exit from the
product.
Do not connect to the same circuit as a heavy load or equipment
that generates line noise.
Unplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning. Clean the instrument with a soft cloth, a mild detergent,
and lukewarm water. Never use harsh or abrasive cleansers or
organic solvents.
Before Playing The X1 20/1 30
Connecting the Power Supply
To Insert Batteries
NOTE
Your keyboard can use either your home AC power outlet or dry cell
batteries as a power source.
1. Turn the unit over and remove the battery cover.
2. Insert six Size "C" dry cell batteries. Be sure they are aligned
in the proper direction.
Replace the battery cover.
e Do not mix battery type (or new batteries with old ones), as
this may cause problems such as battery fluid leakage.
¢ Remove the batteries when not using the keyboard for long
periods of time.