Table of Contents
Advertisement
Using The SYSTEM Functions
Navigating in SYSTEM
Mode
TUNING CONTROL
Function
Value
tun|<—
TRANSPOSE
Function
Value
Erni
TOUGH RESPONSE
ON/OFF
Function
Value
tou!—lon |
PEDAL FUNCTION SELECT
Function
Value
In this section, we will describe the keyboard's SYSTEM functions
which deal with the overall control of the keyboard.
The SYSTEM functions are assigned the following "function numbers".
X120
= X130
TUNING CONTROL (Pitch Adjustment)
TRANSPOSE (To change keys)
TOUCH RESPONSE ON/OFF
PEDAL FUNCTION SELECT *
CLICK ON/OFF (only X120)
MIDI TRANSMIT CHANNEL SELECT (only
X130) *
ACCOMPANIMENT MIDI OUT ON/OFF (only
X130) *
LOCAL CONTROL ON/OFF (only X130) *
i U'd&
WN
~~]
ON Ai
BON
The function settings marked with * will remain even after turning
the keyboard's power off.
1. With the Accompaniment stopped, simultaneously press the SOUND
button and STYLE button to enter the SYSTEM mode.
|
2. Use the SELECTOR buttons to enter the number of your desired
SYSTEM function (for example, if you want the TRANSPOSE
function, you would press "2").
3. Change the value using +1/-1 buttons.
4. Press the DEMO button to leave the SYSTEM mode.
Adjusts the keyboard's pitch within a range of -08 to 07.
If you press the +1 button once, the number in the display will change
to read 01 and the pitch will raise slightly. If you press the -1 button
instead, the number will change to -01 and the pitch will drop slightly.
Adjusts the keyboard's pitch by one full octave upward or downward
(that is, from -12 half steps to +12 half steps).
If you press the +1 button, the number in the display will change to
read 01 and the pitch will raise by a half step. If you press the -1
button instead, the number will change to -01 and the pitch will drop
by a half step.
Lets you select from two different "touch" settings which are numbered
as follows:
ON:
Fora WIDE dynamic range, providing greater contrast
between loud and soft playing.
Off:
Touch Response is deactivated. Each key will play at the
same volume level no matter how hard you strike the key.
You can change the function to be assigned for the foot pedal connected
to the PEDAL jack of X120/130.
FIL:
Sync/Fill in function (same as SYNC/FILL IN button on
the front panel).
HOL: Hold pedal function
SAG
Advertisement
Table of Contents
