Advertisement
138 Series Sterilizers
_
Operations and Maintenance Manual
Turn the operating valve to the dry position
and leave all the valves open.
The
sterilizer door
should
be closed
and
tightened only enough so that the handles
clear the front door of the case when
it is
closed.
Remove all external piping and wiring.
Release fuel tank air pressure and burner
assembly.
Drain the fuel tank into a suitable
container.
Close the top door and both sides.
Latch
into place.
Unscrew
the
two
T bars
holding
the
rear
door to the case.
Raise the back of the unit
up
to
permit
swinging
the
door
into
its
closed position.
Latch the door in place.
Release the T bars on the front of the door
and swing up into closed position and latch
in place.
|
Original
November, 1996
M_138.00C
Advertisement
