Advertisement
PD-M423, PD-M403 |
°
°
'
:
:
°
*1: Fix the motor 101 on the loading board assembly 105 so that
the label attached on the motor faces the direction illustrated. _~°
2
*1 Label
A
=
*2: Fix the motor 101 on the motor board
10
assembly 110 so that the label
attached on the motor faces the
direction illustrated.
B
=
C
=
© How to install the disc table
(0) Usenippers or other tool tocut the three sections
marked ® and the three sections marked ® in
figure. Then remove the spacer.
[2] While supporting the spindle motor shaft with
the stopper, put spacer on top of yoke M, and
stick the disc table on top (takes about 9kg press-
ure). Detach the spacer.
D
Advertisement
