Panasonic SC-AK47 Operating Instructions Manual page 7

FM outdoor antenna
(not included)
Shield braid
15 mm
@ ( —- Core wire
AM loop antenna
(included)
Analog player (not
included)
Rear panel of this unit
Rear panel of this unit
Surround speakers
(not included)
Connections
@Criterc! anicmns cmnadiions
You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced-concrete building, etc.
Before using Za
FM outdoor antenna £Y
Disconnect the FM indoor antenna if an FM outdoor antenna is in-
stalled.
@ Remove a piece of the outer vinyl insulator.
@ Twist the shield braid.
@) Expose the core wire.
An outdoor antenna should be installed by a qualified technician only.
AM outdoor antenna E]
Connect the outdoor antenna without removing the AM loop antenna.
Run 5 to 12 m of vinyl-covered wire horizontally along a window or
other convenient location.
When the unit is not in use, disconnect the outdoor antenna to prevent
possible damage that may be caused by lightning. Never use an
outdoor antenna during an electrical storm.
| :
@ An analog player with a built-in phono equalizer can be connected.
® For details, refer to the instruction manual of the units which are to
be connected.
® When units other than those described below are to be connected,
please consult with your audio dealer.
Sunnie) qpackar (net thidhrclec)
Connecting the surround speakers produces a feeling of depth and
movement of sound, and provides the listener with a feeling of presence
like that of a movie theater.
@ This unit has an output impedance of 32Q. Ensure that you only
use surround speakers with an input impedance of 320.
Recommended surround speakers: 5B-PS60A
® If only one of the surround speakers is connected, no sound will
come out. Be sure to connect both speakers.
7
RQT4738