Panasonic SC-AK47 Operating Instructions Manual page 6

Before using —_
Adhesive tape
FM indoor antenna
Antenna holder
AM loop
antenna
RQT4738
Connections
Cone coonadiins (fir supplied] aasassortied)
e Plug the AC power cord into a household AC outlet only after all
other connections have been made.
@ TO prepare the AM loop antenna wire and speaker cords, twist the
vinyl cover tip and pull off.
Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where radio
signals are received with the least amount of interference.
For best reception sound quality:
An FM outdoor antenna is recommended. (See page 7.)
2 | Connect the AM loop antenna.
After attaching the antenna, turn on the system and tune in a
broadcast station. Then, turn the antenna to the angle of best
reception and least interference.
Connect the front speaker cables.
Connect each end of the speaker cables to the terminai lever of
the same color.
e Use only the supplied tront speakers.
The combination of the main unit and front speakers provide
the best sound. Using other front speakers can damage the
unit and sound quality will be negatively affected.
e To prevent damage to circuitry, never short-circuit positive (+)
and negative (—) speaker wires.
4] Connect the AC power cord.