Ethernet Cable Connection - Grundfos CIM 550 Ethernet GiC Instructions Manual

Table of Contents

Advertisement

1
2
Secure connectivity for CIM 550
Pos. Description
1
Grundfos device
2
Firewall
3
Internet
For CIM 550 Ethernet GiC communication, the
following ports should be opened in the firewall for
outbound traffic only:
Port Description
443 GiC connection
8883 GiC connection
53
DNS
123 NTP
4.1.2 RF safety
Installers and end users must be provided
with these installation and operating
instructions and operating conditions for
satisfying RF exposure compliance.
4.1.3 Radio frequency radiation exposure
information (for Canada and US only)
CAUTION
Radiation
Minor or moderate personal injury
This equipment complies with FCC and
ISED radiation exposure limits set forth
for an uncontrolled environment. This
equipment must be installed and
operated with a minimum distance of
20 cm (0.66 feet) between the radiator
and your body.
This transmitter must not be co-located
or operated in conjunction with any
other antenna or transmitter.
This device complies with Part 15 of the
FCC Rules and with license exempt RSSs
of Innovation, Science & Economic
Development Canada.
4.1.4 EMC statements for USA
3
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
4.1.5 Safety precautions for UK

4.2 Ethernet cable connection

Use a RJ45 plug and an Ethernet cable.
Maximum cable length
Speed
[Mbit/s]
100/1
CIM 550 is designed for flexible network installation.
The Ethernet port has its own MAC address.
Changes or modifications made to this
equipment not expressly approved by
Grundfos may void the FCC authorization
to operate this equipment.
The CIM module is not intended for use in
any home appliance, home automation,
home control system or consumer product
in the UK.
For GiC communication, ensure that the
network is protected by a firewall.
Max. cable length
Cable type
[m(ft)]
CAT5, CAT5e, CAT6
100 (328)
7

Advertisement

Table of Contents
loading

Table of Contents