Kenwood TM-401A Instruction Manual page 16

(2) Programmable scan
16
430.0 440.0
Lower Upper
limit limit
For USA version:
Lower limit - 440.0 MHz
Upper limit - 450.0 MHz
cies designated in memory channel 5.
Up scan Down scan
ii) When VFO stays at B point, scan starts as shown.
Up scan Down scan
Hold the mic UP or DWN switch depressed for
Holding the UP/DWN switch depressed allows
rapid up or down scan.
Holding the MHz key depressed allows rapid
scan in 1 MHz steps.
During up scan, depressing the DWN key or
turning the tuning control one click to the left
6 | Scan direction reverses the direction.
During down scan, reversing the above pro-
5 | Rapid scan
Holding the UP/DWN key depressed allows the
scan to go beyond the upper or lower frequency
limit.
Example: During up scan from R to T, hold
prow reverses the direction.
7 Other scan range
Lights
The flashing dot will stop.