Advertisement
GCF - Installation and operating manual
PRESSURE EQUIPMENT DIRECTIVE PED 2014/68/EU
(Fluid group 1)
GCF 20 - GCF 31
GCF 40 - GCF 42
Category 1, Module A
GCF 43 - GCF 52
Category 2, Module H
GCF 60 - GCF 61
Category 3, Module H
(Fluid group 2)
GCF 20 - GCF 42
GCF 43 - GCF 52
Category 1, Module A
GCF 60 - GCF 61
Category 2, Module H
There is Technical datasheet available. For additional technical specification, contact
manufacturer.
Safety instructions
The relevant safety at work and accident prevention regulations, plus operating instructions,
shall apply for operating the filter. The filter has been constructed in accordance with the
generally recognized rules of engineering. It complies with the requirements of directive
2014/68 EU concerning pressure equipment.
Ensure that installation complies with local laws for operation and routine testing of
pressure equipment at the place of installation.
Operator/user of the filter should make himself familiar with the function, installation and
start-up of the unit. All the safety information is always intended to ensure your personal
safety.
• Do not exceed max. operating pressure or operating temperature range (see data
label).
• The permissible working temperatures and pressures for ad-on parts and filter
elements are given under Technical data for those ad-ons. Maximum temperature
and pressure for assembled system is the lowest of any individual part.
• It is necessary to ensure that the unit is equipped with the corresponding safety and
test devices to prevent the permissible operating parameters from being exceeded.
• Filter has been designed for a primarily static pressure. Rapid changes of pressure are
not allowed.
• Ensure that the filter is not subject to vibrations that could cause fatigue fractures.
• Filter is not to be subjected to mechanical stresses.
4
All manuals and user guides at all-guides.com
Not required
Not required
Advertisement
