Advertisement
Example 3: for Multi monitor
[mi
WI
ko munu
Upto
bend
aire
Personal Computer
©
15P
Notes:
@ When the RGB OUT Terminal is used, set the RGB Impedance Switch to Hi-Z position.
@ If you want to make the bridge connections by VIDEO IN/OUT, please use RGB MULTI IN/OUT
Terminals {pin © of D sub 15 pin, please see the pin layout in page 9).
@ Please use the shield cable for D sub 15 pin.
@ How to use the superimpose function
RGB signal title, etc., can be superimposed to VIDEO signal screen by connecting VIDEO and RGB signals to the
RGB terminal. (The background of superimposed characters cannot be halftones, due to the fact that this monitor
cannot receive the YM signal.)
Getting ready
(1) Connect VIDEO signal to pin ©.
(2) Connect AUDIO signal for RGB to pin @.
(3) Connect RGB signals (text broadcast signals, etc.) for superimposing to pins D, @ and ©.
(4) Connect YS signal to pin ©.
* Do not connect sync signal to pin @.
Operation
RGB signals can be superimposed while VIDEO signal and AUDIO signal are being input to pin @ and pin @,
respectively, by setting the Input Selection Button (RGB MULTI/VIDEQ) to RGB MULTI.
CAUTIONS
1. The input signal for superimposing must be RGB signat of 15.75kHz
horizontal scanning frequency.
. When VIDEO signal and RGB signal are being input from separate equipment,
a TBC with GENLOCK must be connected.
Advertisement
