Download Print this page

Power Supply - HP 467A Operating And Service Manual

Power amplifier/supply
Hide thumbs Also See for 467A:

Advertisement

Model 467A
Section I
SECTION
1
GENERAL
INFORMATION
1-1. DESCRIPTION.
1-2.
The solid state 467A Power Amplifier/Supply
is a 10 watt peak power amplifier and -20 to +20 voit
de power
supply.
The power
amplifier has a wide
bandwidth with low de drift from de to 1 MHz offering
wide applications
wherever
a power
source
is ге-
quired.
Low distortion (<0, 01%), low drift and 0. 3%
gain accuracy are obtained with high quality compo-
nents and multiple feedback techniques.
The gain of
the amplifier
may
be varied between
one and ten by
a front panel
switch which provides fixed gain steps
accurate to +0. 3%. A variable gain control enables
the user
to set the gain anywhere between zero and
ten witha resolution of better than 0.1% of full output.
Table 1-1 gives the specifications for the 467A Power
Amplifier /Supply.
1-3. OUTPUT
CAPABILITY.
1-4.
An output greater
than
20 volts peak and 0.5
ampere peak is available from ас up to 1 MHz.
The
amplifier is protected at all times from short cir-
cults.
The input circuit of the 467A is protected
against
damage
from
voltages
up to 200 volts р-р.
Input and output connectors are provided at the front
and rear of the instrument.
The amplifier is a three
terminal
device
isolated
from
chassis
and may
be
floated up to 200 volts de above chassis ground.
1-5.
POWER
SUPPLY.
1-6.
A front panel switch converts the amplifier to
a power supply that delivers +20 volts de at currents
ир to +0. 5 ampere.
The output level is controlled
by a potentiometer which permits voltages to be set
with resolution of 0.1% of full scale.
Full scale
ranges of +1,+2,44, +10, and+20 volts are selected
by the front panel range switch.
1-7.
INSTRUMENT
IDENTIFICATION.
1-8.
Hewlett-Packarduses a two-section eight-digit
serial number
(000-00000).
If the first three digits
of the serial number
on your instrument do not agree
with those
on the title page
of this manual,
change
sheets supplied withthe manual will define differences
between your instrument andthe Model 467A described
in this manual,
1-1

Advertisement

loading