Advertisement
{W11lJrive Beit Ccnditicm
Check condition of drive belt.
for cracks, fraying or abnormal wear.
(Uneven wear, wear on one side, etc.),
if
abnormal wear is noted,
cause
is misalignment of drive and driven
lays. Contact your dealer. If belt is less
than 7/8" wide it should be replaced.
iM11
Battery Connections
Check that battery connections are
and free of corrosion. if not, remove cor-
rosion
a stiff brush then dean with
a solution of
soda and water. Rin-
se and
wei!.
reconnectinq. coat
terminals and connectors with
to retard corrosion. Check
that battery is wei secured.
Caution: Do not allow clsanino solution
to enter
It will destroy the chem-
ical
properties of
the
electrolyte.
IM2l
Carl:nmstor
Nuts
After the first 2 hours of ooeration check
tightness of carburetor
nuts. Open
tab locks,
nuts and close tab
locks.
Caution: The tab locks should
be
changed
after being
three times.
iM3lIJrille
Chain
Tension
Note:
Chain tension should
also
be checked
after the first 5 hours of operation
To
check.
1. Run vehicle forward so that true free-
play
can
be obtained.
2.
Unfasten passenger
seat
belt unscrew
gear shift lever knob. Remove seats and
access
Pull off insnection
and
check
The free-olav should
be 1/4 inch.
If necessary to
1. Remove capscrew
chain ten-
sioner in
Chain tensioner is located
on driven
side.
2. Rotate
to obtain
correct
3.
I tensioner capscrew,
f../PS\r'OI_
tion access
and seat. Install
knob.
Advertisement
