Grease the suspension bogie wheels with
IOVV-H3rr10.
grease.Pu
rnp
the grease
at the center of each wheel
u nti
I
new grease appears at the
of inner
side of shaft. Also grease rear axles at
grease
using a
10\1\1
pressure g(0)3S8
gun.
Drive Pulley
The drive
ley needs
to
be lubricated
bi-monthly or every 20 hrs. of operation.
To lubricate the
open the engine
cover and remove the
guard. Using
a grease gun filled
low-temp. grease,
pump
once
or
twice
through the grease
of the pu
Caution:
Too much lubricant in the drive
vviH affect the drive belt. If neces-
sarv. lubricate the drive
more tre-
Do not
with
lubricant.
Driven Pultev
With engine cover open, grease the driven
pulley shaft as follows.
1.
Remove ou:
guard and slip drive
belt from driven pul
2.
Thoroughly dean the driven
shaft.
3.
Apply a
light
coat of
low-temp.
grease
on the shaft.
Always
lubricate lightlY and
wipe off
~Uf fJ!U~.
Note: Activate the slidinq halt several
times to distribute lubricant over ful!
of
shaft,
Be careful that lubricant
does not get on inner halves of
13