Vivitar FBWDS-BLK User Manual

Thank you for purchasing the Vivitar 2in1 Charging Phone Stand, item FBWDS-BLK. Your phone stand can charge two devices at once with a 10W device charger and a 3W Apple Airpod charger. Please read this manual carefully FIRST
in order to get the most out of your phone stand.
Power
Use the included USB-C Cable to power your phone stand.
Charging Port
1. Insert the USB-C end of the charging cable into the phone stand's
Charging Port.
2. Insert the USB-A end of the charging cable into a suitable USB
charging adapter.
NOTE: Once plugged in, the LED Indicator Light on your stand will turn
on red and blue momentarily, then turn off.
3. Once your phone stand is powered on, you can use it to
charge your devices.
2 1 charging
in
phone stand

Charging a Phone

Smartphone
Charging Pad
If you have a phone with wireless charging capability, place it on the
Smartphone Charging Pad to charge it. To do so, follow the steps below.
1. Before placing your phone on the charging pad, make sure your phone
stand is plugged into a power source.
2. Remove any case or protective cover that may block the back of your
phone so that it rests against the smartphone charging pad.
X
3. Place the back of your phone on the center of the charging pad
horizontally. The back of your device should be laid flat on the charging
pad.
4. Once the charging pad is in contact with the back of your phone, the
phone should start charging. Use the display screen on your phone to
track the charging progress.
5. Leave your device on the charging pad to charge. When the charging
pad is charging a device, the indicator light will turn on blue.
NOTE: While the charging pad is compatible with most devices that have
Qi charging capability, it may not be compatible with some older versions
of these devices.
USER'S MANUAL

Charging Airpods

Airpods
Charging Pad
You can also charge Apple AirPods by placing them on the Airpods
Charging Pad.
There is no indicator light on the charging pad when the Airpods Charging
Pad is charging a device, use the indicator light on your Airpods to track
the charging progress.
If both charging pads are being used, the indicator light will turn on blue.
IMPORTANT
Remove your devices once fully charged.
You must place
NOTE: For best results, use a plug-in adapter with power above QC 18W
your phone
when charging 2 devices at once.
horizontally on
the charging pad
or it will not
charge
ITEM FBWDS-BLK