Items Delivered With The Kiln; Range Of Application; Specifications; Caution - Efco UHLIG U92/008 Operating Instructions Manual

1. Items delivered with the kiln:

Kiln with an extractor, temperature control device and temperature sensor.

2. Range of application:

The kiln is suited for all firing techniques for firing temperatures from 400 °C to 1100 °C, e.g.
for firing glass, enamels and ceramics, as well as for annealing and hardening of metals and
tools.

3. Specifications:

Volume of the firing chamber:
Maximum temperature:
Voltage:
Outside dimensions H x W x D:
Firing chamber H x W x D:
Net weight:
Thermal element:
Fine cracks are an inevitable consequence of the high temperatures in the firing chamber and
can already appear during the test firing in the factory.
The cracks are a result of strong temperature fluctuations in the firing chamber, so please
only open the door of the hot kiln if it is absolutely necessary for your work. After firing,
always allow the kiln to cool down with the door closed.
The cracks do not constitute a safety deficiency or a functional defect of your kiln, but rather
an optical impairment, which has no effect on the use of the kiln. Any complaints are thus not
justified.

4. Caution:

Due to the functioning of your kiln heat is produced.
All parts of this kiln can be hot.

5. Personal protective equipment:

Always wear heat-resistant working gloves and protective goggles for your personal safety
when working with the kiln.
8,4 l
1200 °C
230 V~, 3000 W, 13 A
595 x 415 x 520 mm
200 x 200 x 210 mm
approx. 53 kg
160 mm NiCr-Ni with a diode plug